Welcome!

WebRTC Summit Authors: Liz McMillan, Elizabeth White, Pat Romanski, Roger Strukhoff, Yeshim Deniz

Press Release

Vertebral Compression Fracture Repair Market to Reach USD 2.82B

Minimally Invasive Vertebral Compression Fracture Repair Market

Vertebral compression fractures (VCFs) or spine fractures, as they are commonly called, are instances of a broken bone or cracked vertebrae in the spine. VCFs commonly occur in people having osteoporosis and low bone density. However, severe trauma such as accidents, sports injury or a hard fall and metastatic tumors are common reasons for VCFs.

Browse the full report: http://www.transparencymarketresearch.com/vertebral-compression-fracture-repair.html

Clinical symptoms of VCFs may include sudden onset of back pain, limited spinal mobility, increase in pain while standing or walking, disability and deformity of the vertebrae over time, eventual vertebral height loss and medical conditions like kyphosis, segmental instability and neurological complications.

Though nonsurgical ways of treating VCFs such as medication, exercises, bracing and bed rest are widely prevalent, surgical ways such as kyphoplasty and vertebroplasty have also evolved as valuable adjunctive treatment options. are also increasingly gaining popularity for treating complex cases where non-surgical methods fail to benefit.

Kyphoplasty involve percutaneous cannulation of the vertebral fracture by placing an inflatable bone tamp (a balloon like structure) into the fracture. This helps in restoring the original height of the vertebrae, which is then injected with bone cement. Vertebroplasty, on the other hand, involves direct percutaneous injection of bone cement on the vertebral fracture.

Vertebroplasty helps in relieving pain and enhancing mobility in patients while Kyphoplasty also helps in restoring the height of the deformed vertebrae, thus assisting in the cure of kyphosis. Complication rates of less than 2 percent for osteoporotic VCFs and upto 10 percent for VCFs due to malignant tumors, patient testimonials of significant pain relief and rise in physical functioning along with advancements in the technology used for treatment have all resulted in the popularity of these treatments over the past few decades.

However, a comparatively lower complication rate post procedure and additional benefits such as restoration of vertebral height have resulted in a higher adoption rate of kyphoplasty procedures over vertebroplasty throughout the world, particularly in North America. Considering this popularity of the procedure and its obvious advantages over vertebroplasty, its market share in the coming future is estimated to be increasing rapidly. In 2011, the global market for kyphoplasty was worth USD 555.4 million.

The international market of minimally invasive VCF repair is highly secure in nature. There only a handful of vendors that are well established and dominate the market by capturing over 80% of its share. The existence of only a few market players has resulted in an intensive competitive rivalry among the players.  The market is further characterized by activities such as acquisitions, long term supply agreements and partnerships. The major companies that dominate this market include Medtronic Inc., Cook Medical Inc., CareFusion Corporation, DFine, Inc., Zimmer Holdings, DePuySynthes Inc., among few others.

Owing to the early launch of innovative products and techniques in the US, it is no surprise that the country is the current market leader of the Minimally Invasive Vertebral Compression Fracture Repair Market. Existence of factors such as high awareness about VCF conditions and the treatments available and a supportive economic base particularly in the form of well-defined medical re-imbursement policies has also proved instrumental in the growth of the minimally invasive VCF repair market in the US. However, developing economies such as China, Japan, India, Korea are observed as potentially emerging markets owing to the aging population, increase in general awareness about osteoporosis and development in healthcare facilities in these countries.

More Stories By Vaibhav Mondhe

Vaibhav Mondhe works for Transparency Market Research (TMR). TMR is a market intelligence company providing global business research reports and consulting services. Our exclusive blend of quantitative forecasting and trends analysis provides forward-looking insights for thousands of decision-makers.

@WebRTCSummit Stories
SYS-CON Events announced today that CrowdReviews.com has been named “Media Sponsor” of SYS-CON's 22nd International Cloud Expo, which will take place on June 5–7, 2018, at the Javits Center in New York City, NY. CrowdReviews.com is a transparent online platform for determining which products and services are the best based on the opinion of the crowd. The crowd consists of Internet users that have experienced products and services first-hand and have an interest in letting other potential buyers learn their thoughts on their experience.
SYS-CON Events announced today that Telecom Reseller has been named “Media Sponsor” of SYS-CON's 22nd International Cloud Expo, which will take place on June 5-7, 2018, at the Javits Center in New York, NY. Telecom Reseller reports on Unified Communications, UCaaS, BPaaS for enterprise and SMBs. They report extensively on both customer premises based solutions such as IP-PBX as well as cloud based and hosted platforms.
It is of utmost importance for the future success of WebRTC to ensure that interoperability is operational between web browsers and any WebRTC-compliant client. To be guaranteed as operational and effective, interoperability must be tested extensively by establishing WebRTC data and media connections between different web browsers running on different devices and operating systems. In his session at WebRTC Summit at @ThingsExpo, Dr. Alex Gouaillard, CEO and Founder of CoSMo Software, presented a comprehensive view of the numerous testing challenges researchers have faced before arriving at the first release candidate of the WebRTC specifications.
WebRTC is great technology to build your own communication tools. It will be even more exciting experience it with advanced devices, such as a 360 Camera, 360 microphone, and a depth sensor camera. In his session at @ThingsExpo, Masashi Ganeko, a manager at INFOCOM Corporation, introduced two experimental projects from his team and what they learned from them. "Shotoku Tamago" uses the robot audition software HARK to track speakers in 360 video of a remote party. "Virtual Teleport" uses a multiple Intel RealSense Depth Camera to scan 3D and build 3D models in real-time, and display as hologram in front of remote participants.
SYS-CON Events announced today that Evatronix will exhibit at SYS-CON's 21st International Cloud Expo®, which will take place on Oct 31 – Nov 2, 2017, at the Santa Clara Convention Center in Santa Clara, CA. Evatronix SA offers comprehensive solutions in the design and implementation of electronic systems, in CAD / CAM deployment, and also is a designer and manufacturer of advanced 3D scanners for professional applications.
SYS-CON Events announced today that Synametrics Technologies will exhibit at SYS-CON's 22nd International Cloud Expo®, which will take place on June 5-7, 2018, at the Javits Center in New York, NY. Synametrics Technologies is a privately held company based in Plainsboro, New Jersey that has been providing solutions for the developer community since 1997. Based on the success of its initial product offerings such as WinSQL, Xeams, SynaMan and Syncrify, Synametrics continues to create and hone innovative products that help customers get more from their computer applications, databases and infrastructure. To date, over one million users around the world have chosen Synametrics solutions to help power their accelerated business and personal computing needs.
SYS-CON Events announced today that Google Cloud has been named “Keynote Sponsor” of SYS-CON's 21st International Cloud Expo®, which will take place on Oct 31 – Nov 2, 2017, at the Santa Clara Convention Center in Santa Clara, CA. Companies come to Google Cloud to transform their businesses. Google Cloud’s comprehensive portfolio – from infrastructure to apps to devices – helps enterprises innovate faster, scale smarter, stay secure, and do more with data than ever before.
Recently, WebRTC has a lot of eyes from market. The use cases of WebRTC are expanding - video chat, online education, online health care etc. Not only for human-to-human communication, but also IoT use cases such as machine to human use cases can be seen recently. One of the typical use-case is remote camera monitoring. With WebRTC, people can have interoperability and flexibility for deploying monitoring service. However, the benefit of WebRTC for IoT is not only its convenience and interoperability. It has lots of potential to address current issues around IoT - security, connectivity and so on - based on P2P technology. It will become a key-component especially in edge computing use cases, in his view.
Cloud Expo | DXWorld Expo have announced the conference tracks for Cloud Expo 2018. Cloud Expo will be held June 5-7, 2018, at the Javits Center in New York City, and November 6-8, 2018, at the Santa Clara Convention Center, Santa Clara, CA. Digital Transformation (DX) is a major focus with the introduction of DX Expo within the program. Successful transformation requires a laser focus on being data-driven and on using all the tools available that enable transformation if they plan to survive over the long term. A total of 88% of Fortune 500 companies from a generation ago are now out of business. Only 12% still survive. Similar percentages are found throughout enterprises of all sizes.
The 22nd International Cloud Expo | 1st DXWorld Expo has announced that its Call for Papers is open. Cloud Expo | DXWorld Expo, to be held June 5-7, 2018, at the Javits Center in New York, NY, brings together Cloud Computing, Digital Transformation, Big Data, Internet of Things, DevOps, Machine Learning and WebRTC to one location. With cloud computing driving a higher percentage of enterprise IT budgets every year, it becomes increasingly important to plant your flag in this fast-expanding business opportunity. Submit your speaking proposal today!
22nd International Cloud Expo, taking place June 5-7, 2018, at the Javits Center in New York City, NY, and co-located with the 1st DXWorld Expo will feature technical sessions from a rock star conference faculty and the leading industry players in the world. Cloud computing is now being embraced by a majority of enterprises of all sizes. Yesterday's debate about public vs. private has transformed into the reality of hybrid cloud: a recent survey shows that 74% of enterprises have a hybrid cloud strategy. Meanwhile, 94% of enterprises are using some form of XaaS – software, platform, and infrastructure as a service.
22nd International Cloud Expo, taking place June 5-7, 2018, at the Javits Center in New York City, NY, and co-located with the 1st DXWorld Expo will feature technical sessions from a rock star conference faculty and the leading industry players in the world. Cloud computing is now being embraced by a majority of enterprises of all sizes. Yesterday's debate about public vs. private has transformed into the reality of hybrid cloud: a recent survey shows that 74% of enterprises have a hybrid cloud strategy. Meanwhile, 94% of enterprises are using some form of XaaS – software, platform, and infrastructure as a service.
DevOps at Cloud Expo – being held June 5-7, 2018, at the Javits Center in New York, NY – announces that its Call for Papers is open. Born out of proven success in agile development, cloud computing, and process automation, DevOps is a macro trend you cannot afford to miss. From showcase success stories from early adopters and web-scale businesses, DevOps is expanding to organizations of all sizes, including the world's largest enterprises – and delivering real results. Among the proven benefits, DevOps is correlated with 20% faster time-to-market, 22% improvement in quality, and 18% reduction in dev and ops costs, according to research firm Vanson-Bourne. It is changing the way IT works, how businesses interact with customers, and how organizations are buying, building, and delivering software.
@DevOpsSummit at Cloud Expo, taking place June 5-7, 2018, at the Javits Center in New York City, NY, is co-located with 22nd Cloud Expo | 1st DXWorld Expo and will feature technical sessions from a rock star conference faculty and the leading industry players in the world. The widespread success of cloud computing is driving the DevOps revolution in enterprise IT. Now as never before, development teams must communicate and collaborate in a dynamic, 24/7/365 environment. There is no time to wait for long development cycles that produce software that is obsolete at launch. DevOps may be disruptive, but it is essential.
SYS-CON Events announced today that T-Mobile exhibited at SYS-CON's 20th International Cloud Expo®, which will take place on June 6-8, 2017, at the Javits Center in New York City, NY. As America's Un-carrier, T-Mobile US, Inc., is redefining the way consumers and businesses buy wireless services through leading product and service innovation. The Company's advanced nationwide 4G LTE network delivers outstanding wireless experiences to 67.4 million customers who are unwilling to compromise on quality and value. Based in Bellevue, Washington, T-Mobile US provides services through its subsidiaries and operates its flagship brands, T-Mobile and MetroPCS. For more information, visit https://www.t-mobile.com.
SYS-CON Events announced today that Cedexis will exhibit at SYS-CON's 21st International Cloud Expo®, which will take place on Oct 31 - Nov 2, 2017, at the Santa Clara Convention Center in Santa Clara, CA. Cedexis is the leader in data-driven enterprise global traffic management. Whether optimizing traffic through datacenters, clouds, CDNs, or any combination, Cedexis solutions drive quality and cost-effectiveness. For more information, please visit https://www.cedexis.com.
SYS-CON Events announced today that Vivint to exhibit at SYS-CON's 21st Cloud Expo, which will take place on October 31 through November 2nd 2017 at the Santa Clara Convention Center in Santa Clara, California. As a leading smart home technology provider, Vivint offers home security, energy management, home automation, local cloud storage, and high-speed Internet solutions to more than one million customers throughout the United States and Canada. The end result is a smart home solution that saves you time and money and ultimately simplifies your life.
SYS-CON Events announced today that Opsani will exhibit at SYS-CON's 21st International Cloud Expo®, which will take place on Oct 31 – Nov 2, 2017, at the Santa Clara Convention Center in Santa Clara, CA. Opsani is the leading provider of deployment automation systems for running and scaling traditional enterprise applications on container infrastructure.
SYS-CON Events announced today that Nirmata will exhibit at SYS-CON's 21st International Cloud Expo®, which will take place on Oct 31 – Nov 2, 2017, at the Santa Clara Convention Center in Santa Clara, CA. Nirmata provides a comprehensive platform, for deploying, operating, and optimizing containerized applications across clouds, powered by Kubernetes. Nirmata empowers enterprise DevOps teams by fully automating the complex operations and management of application containers and its underlying resources. Nirmata not only simplifies deployment and management of Kubernetes clusters but also facilitates delivery and operations of applications by continuously monitoring the application and infrastructure for changes, and auto-tuning the application based on pre-defined policies. Using Nirmata, enterprises can accelerate their journey towards becoming cloud-native.
SYS-CON Events announced today that Opsani to exhibit at SYS-CON's 21st Cloud Expo, which will take place on October 31 through November 2nd 2017 at the Santa Clara Convention Center in Santa Clara, California. Opsani is creating the next generation of automated continuous deployment tools designed specifically for containers. How is continuous deployment different from continuous integration and continuous delivery? CI/CD tools provide build and test. Continuous Deployment is the means by which qualified changes in software code or architecture are automatically deployed to production as soon as they are ready. Adding continuous deployment to your toolchain is the final step to providing push button deployment for your developers.